Frequently Asked Questions
If you’re new to FOCUS-1, this short introduction video is the best place to begin. It gives you a clear picture of what FOCUS-1 is and how it can make a difference in your plant. Already familiar with the basics? Then dive straight into the FAQ below to find detailed answers to your technical questions.
How easy is it to install the FOCUS-1 in my existing setup?
The FOCUS-1 is designed with standard installation lengths in mind. For DN80 and DN100, the device matches the installation length of a traditional globe control valve, and for DN50 it matches a flow meter. This makes it straightforward to replace existing equipment without redesigning your setup. In addition, the device adapts to industrial communication standards, so integration into your current infrastructure is simple.
Which communication protocols does the FOCUS-1 support?
FOCUS-1 comes standard with 4–20 mA plus HART. It also supports Profinet, Ethernet/IP, and Modbus TCP, and has been successfully integrated with Siemens and Rockwell systems. This ensures smooth communication with existing PLCs and DCS environments.
Can software updates for FOCUS-1 be done remotely?
Technically yes, but due to cybersecurity regulations we recommend keeping updates local. Our approach: FOCUS-ON provides the update, and your team installs it directly. This ensures security while keeping your device up to date.
Is it possible to customize the internal controller of FOCUS-1?
Yes, if your application requires a different PID control then flow, pressure or delta pressure, we can adapt the internal controller to fit. Since these are specialized cases, this is always handled in direct consultation with your engineering team.
Can I adjust PID settings on the FOCUS-1 dashboard?
Yes, the PID settings can be adjusted directly via the dashboard, even remotely if your cybersecurity setup allows it. However, FOCUS-1’s built-in autotuning minimizes the need for manual adjustments, as the system continuously optimizes itself.
What are the product application details of the FOCUS-1 smart meter valve?
The FOCUS-1 is built for demanding industrial applications such as cooling systems, boiler feed water, and heat exchangers. Its specifications and limits are:
- Diameters available: DN 50, DN 80, DN 100 (2”, 3”, 4”)
- Body material: 1.4408 / ASTM stainless steel
- Trim material: 1.4404 / 316L stainless steel
- Seat bore size: 24 – 100 mm
- KV values: 10 – 160 m³/h
- Flow measurement: Transducteurs à ultrasons
- Pressure sensors: Thin film
- Temperature sensors: PT 100
- Fail action: FTC / FTO
- Power supply: 85–250 VAC or 18–32 VDC
- Industrial communication: 4–20 mA analogue + HART, PROFINET, Ethernet/IP, or Modbus TCP
Operating limits:
- Pressure: Up to 40 bar (PN 16/40 – Class 150/300)
- Process temperature: –40 °C to 180 °C
- Ambient temperature: –20 °C to 55 °C
- Liquid media: Suitable up to 100 cSt (Newtonian fluids), tolerating up to 2% gas and 5% solids
The FOCUS-1 is ATEX and IECEx certified for use in hazardous areas, combining safety with flexibility.
In which applications can I use the FOCUS-1?
The FOCUS-1 is ideal for liquid media such as cooling water, boiler feed water, oils and edible oils… and much more! Please get in touch with the FOCUS-ON business development team to see if your application is a good fit.
What sizes are available for the FOCUS-1?
It is available in DN 50, DN 80, and DN 100 (2”, 3”, 4”).
Will FOCUS-1 work with my existing plant systems?
Yes. FOCUS-1 supports 4–20 mA, HART, Profinet, Ethernet/IP and integrates with existing PLCs and DCS. No major infrastructure changes are needed.
What about hazardous area?
FOCUS-1 is ATEX and IECEx certified, making it suitable for hazardous areas.
Do operators need retraining to use FOCUS-1?
No. It’s designed to work with the standards your team already uses, so minimal training is required. We designed the dashboard in a intuitive way so that it is easier to use then the most common displays of equipment on the market.
What happens if one part of FOCUS-1 fails?
Because it combines multiple components, this is a common concern. FOCUS-1 is built from proven SAMSON and KROHNE technology, and diagnostics allow early detection of wear so you can schedule maintenance before failure. Also, we have integrated a digital twin that can continue control in case a measurement will fail. FOCUS-1 has been build in a modulair way, making it possible for maintenance to replace components in case of failures. An example of the replace you can find below and can be found on our youtube channel.
Is FOCUS-1 field-proven or just new technology?
It combines a SAMSON 3241 valve, a KROHNE Optisonic flowmeter and P/T sensors of KROHNE, components trusted in process plants for over 40 years.
What is the ROI of switching to FOCUS-1?
FOCUS-1 reduces downtime, simplifies maintenance, and saves around 33% on loop build costs compared to traditional setups.
Is FOCUS-1 better suited for new plants or existing ones?
It’s especially valuable in Greenfield projects, where replacing separate devices with one smart valve saves space and installation cost. But most of our devices are used in brownfield to upgrade existing plants with more insights and predictive capabilities. So in both Greenfield and Brownfield a FOCUS-1 can be of added value.
How fast can FOCUS-1 be installed?
In practice, replacement can be done in under 2 hours when replacing a control valve.
Études de cas
Discover how Silbuster optimizes the CO₂ injection system by integrating the FOCUS-1 Smart Meter Valve into the back pressure control loop. In this setup the FOCUS-1 acts as an intelligent PID back pressure controller, ensuring stable pressure in the saturation vessel to promote maximum CO₂ dissolution.
George Borst
BDL, FOCUS-ON
Discover how Special Refining Company (SRC) transformed its oil cooling process with FOCUS-1, the first Smart Meter Valve, boosting efficiency and control in edible oil refinement.
Edwin Loos
Product and Technical Manager
La production de vapeur est un aspect essentiel du processus de bioraffinage. La régulation minutieuse de la production d'eau et de vapeur vise à réduire la consommation d'énergie et à garantir une empreinte carbone responsable. Un élément crucial pour y parvenir réside dans la gestion efficace des lignes de retour de condensat, qui transportent le condensat vers la chaudière. La sécurité de ce processus est un facteur important. FOCUS-1 s'assure que le réservoir d'eau d'alimentation de la chaudière contient la bonne quantité d'eau pour maintenir des conditions de fonctionnement sûres.
George Borst
BDL, FOCUS-ON
In this case study we will explore the traditional waste incineration process, the inherent challenges, and how FOCUS-ON's innovative smart meter valves have revolutionized operations at the Kristiansand plant. By introducing FOCUS-ON's smart meter valves, the plant has achieved significant advancements in efficiency and control, overcoming previous limitations.
George Borst
BDL FOCUS-ON
Dans le passé, un système séparé de débitmètre et de vanne était utilisé pour remplir les camions d'huile de soja. Cependant, pour cette application spécifique, le besoin d'un contrôle efficace et précis du débit se fait de plus en plus sentir. Pour garantir un processus de chargement des sacs sûr et efficace, en évitant les ruptures de sacs, les déversements et les fuites, un contrôle précis du débit est crucial. En mettant en œuvre FOCUS-1 dans cette application, le processus atteint une imprécision de seulement 0,3% lors du chargement du camion, ce qui permet un contrôle précis du débit et garantit la sécurité grâce à l'inclusion d'un capteur de pression intégré.
GEORGE BORST
BDL FOCUS-ON
